वाटर बेस्ड रोटो-ग्रेव्योर प्रिंटिंग इंक

AQUA GRAVO W-QS (Water based gravure ink medium)

Water-Based Roto-Gravure Printing Inks provided by us, are successfully used in various printing processes such as offset lithography, flexography, and digital printing. These inks typically include no more than 30% solvents in the composition, considerably minimizing VOC emissions. This decrease not only protects the environment from pollution but also provides a safer and better working environment for operators. Water-Based Roto-Gravure Printing Inks are the most prevalent printing process used in flexible packaging manufacture. Low per-unit costs in a high-volume production environment. 

Properties:

·        High colour strength at low viscosity.

·        Rapid drying by absorption into the substrate.

·        Can be formulated for low slip, enhanced rub product resistance.

·        Water based gravure inks are used for wide variety of application.

·        Choking problems are not visible even in long and continues run.

Technical information and ink handling

·        Appearance: Milky white liquid.

·        Miscibility: Good in water.

·        pH: 8 - 9

·        Compatibility: Compatible with water and pigment emulsion.

·        Substrate: Any type of paper and stock substrate.

·        Wash up: Water is normally used. However if inks have been allowed to dry on the rollers or stereos, propylene glycol-ethyl or a mild alkali solution may be necessary to fully remove dried inks.

·        Storage: Being water based “AQUA GRAVO W-QS” is not considered highly inflammable.

(Information provided here is in good faith, to the best of our knowledge and without liabilities)

FAQs of Water Based Roto-Gravure Printing Inks: